English translation for "balance calibration"
|
- 天平校准
Related Translations:
- Example Sentences:
| 1. | In the new balance calibration system , the balance position be measured
新研制的天平校准系统已经投入实际应用。 | | 2. | To develop a good strain - gauge balance calibration system was been regarded as one of the most important works for most aerodynamic research institute
国内外各大空气动力研究机构都非常重视应变天平校准系统研制。 | | 3. | Based on the theory of virtual instrument , this paper presents a software for balance calibration that includes the following features : 1
基于虚拟仪器理论，本论文开发了一套天平校准软件，这套软件有以下特点： 1 | | 4. | In this paper , a 9 - point loading method been used in the new balance calibration system to load six component loads on a balance . at same time , the automatic loads method and the design of loading device are also important
同时,在具有全自动加载功能的校准系统研制中,自动加载方式选取和加载机构的设计也是其中的关键技术难点之一。 | | 5. | The automatic six - component calibration - loads loading system is one of the most important system of a balance calibration system , and how to load the six component loads on a balance is a difficult problem to deal with
如何实现天平校准载荷六分量自动加载,是六分量天平校准系统研制的关键技术问题之一。本文选用了9加载施力点的加载方案实现六分量天平校准载荷的加载,保证各加载分量的精度指标相互协调。 | | 6. | The position measuring system was another important system in the new balance calibration system . to work out the calibration loads in the bcs of balance with the results of balance position measuring is the key technique to improve the veracity of the balance calibration results
通过天平空间位移测量并将地轴系校准载荷换算到天平体轴测量坐标系后再进行天平校准系数计算,是保证本文所研制的地轴系天平校准系统静校结果准确性的关键技术途径。 | | 7. | According to the study work of this paper , an automatic six - component strain gauge balance calibration system development scheme was put forwards : the system calibrates the balances in the ecs , and translates the loads to the bcs of the balances with measuring the balance ’ s position changes during the calibration
本文根据1m高超声速风洞气动力试验的总体要求,提出了采用天平校准载荷地轴系全自动加载、并通过天平空间位移测量将校准载荷换算到天平体轴系( bcs )的六分量天平校准系统总体研制方案,并确定了详细的技术指标。 | | 8. | In the new balance calibration system , the calibration loads was loaded with an automatic device witch drived by a electric - motor , and the calibration loads be measured with high precise force measuring sensors . the force transmission device been carefully designed to avoid the interference of friction
本文采用了电机拖动、高精度力传感器测量载荷值并闭环控制加载的方法实现天平校准载荷的自动加载,同时设计和优选了高精度施力传递机构,保证了校准载荷的加载精度。 | | 9. | Balance calibration system is a complicated automatic device , and involved with many subject such as machine , electric , measuring technique , control , and mechanics . the system most be capable to fit the demands of balance calibration , and most be accuracy and less error . not only the capability of the system be cared , but also the expenses of the manufacture most be considered
天平校准系统是复杂的自动化系统,涉及机电、测量与控制、力学等多个学科门类,不但在功能上要能够满足实际应用的需要,还需要达到较高的精度、较小的系统误差,同时考虑系统综合性能指标与系统造价的合理平衡。 |
- Similar Words：
- "balance budget" English translation, "balance budget theorem" English translation, "balance budget with surplus" English translation, "balance bunker" English translation, "balance bush" English translation, "balance capacitor" English translation, "balance car" English translation, "balance car lift" English translation, "balance carbon" English translation, "balance carried" English translation
|
|
|
